ARTURIA – Matrix-12 V – USER MANUAL
67
4.6.3
Voices
The Voices parameter group in Single mode
Note: unless otherwise indicated, click and drag to edit a parameter value; double-
click to reset.
Play: Normally on (red) by default, these turn green when a particular voice has
been triggered. You can also click them to disable a voice so it will not play.
Zone: This field is used to assign a voice to one of the six Zones, where its note range,
keyboard mode, and other settings can be defined. You can also select one of the
16 MIDI channels for a voice and bypass the Zone parameters.
Transpose: Allows you to change the pitch of a voice in chromatic increments within
a range of + 2/-3 octaves. You could use this for semi-random octave jumps, for
example.
Detune: With this you could put some voices slightly flat and others slightly sharp, or
make them way out of tune. The range is -31 to +31, and in combination with the
Transpose parameter you could set the pitch of a voice to pretty much whatever
you want.
Volume: This parameter sets different output levels for the voices, which could be
handy when layering transposed voices so you can get the balance just right.
Pan: Choose one of seven stereo positions per voice to give the Voice a bit of
motion. This could be extra cool with percussion or a sound effect. Click the field
and a window will open to display the options.
The per-voice pan positions