ARTURIA – Matrix-12 V – USER MANUAL
62
In the above picture the VCO 1 Frequency mod button has been selected, bringing
that parameter into focus in the Modulation Page. We can see that both LFO 1 and
Tracking Generator 1 are selected as modulation sources, although the mod level
for the Track 1 mod is set to 0 so it is having no impact on VCO 1.
These assignments and values can be altered or removed, and more can be added
if mod routings are available. In the example above there are four unused mod
routes.
As for the “buttonless” parameters, the ones that can’t be used as modulation
destinations can still be edited by their respective controls, and also can be
controlled by incoming MIDI data.
4.4.1
The MOD list
Another way to view the modulation routings is to press the MOD button in the
nameplate. This will change the bottom panel to display the Mod list:
Modulation routings 1-20
Note that there are two tabs on the far right side of the Mod list: 1-20 and 21-40. This
means you have 40 modulation routings available for each Single mode preset, and
also means that you will probably never run out of them.