ARTURIA – CS-80 V – USER MANUAL
67
successively to each note played. They are all assigned to zone 1 which covers
the whole keyboard.
Deactivate the VOICE ARP next to the voice mode:
Deactivate the arpeggiator
Begin by placing zone1 to UniLast unison mode. All of the singles should be
played by the same note.
Placing zone1 to UniLast unison mode
Detune them with the DET knobs. The global sound will achieve more
complexity.
Also change the pan position of each of the singles in order to form a very
large stereo sound.
Singles can be sent to delay and chorus effects using the FX button. The ring
modulator will not be used for this sound. Deactivate the R.MOD button on all
of the singles.
It is also possible to change the pitch of certain singles by detuning them by
an octave or a fifth below.
You will thus obtain a rich and powerful lead sound.
5.2.3
Introduction of the arpeggiator in a Multi preset
Now let’s program a Multi preset using the arpeggiator on one of the 4 zones.
Take the preset 2Parts Splits, from the Templates bank.
2 split zones on the keyboard are already in place:
