ARTURIA – CS-80 V – USER MANUAL
63
Open the Modulation Matrix
Now set the LFO1 as a source in the first modulation source area, and the VCO
1 Freq as destination.
The LFO1 speed can be changed with the speed button:
Set the LFO Speed
The VCO1 frequency is now modulated by the LFO1. It creates a kind of
detune, if you set the amount to the maximum, the sound becomes much
more pronounced.
Matrix amount
For the second modulation, we will now modulate the filter by the sub-
oscillator.
For that, select the SubOsc as source and the HP1 cut as destination. Set the
amount you prefer and listen to the sound. You can choose the threshold of
the filter by lowering the filter frequency.
And to finish this part, connect the modulation Wheel to the LFO2 speed, and
the LFO2 to the LP1 cut:
