ARTURIA – CS-80 V – USER MANUAL
62
Decrease the frequency of the low-pass filter
Increase the frequency of the high-pass filter. You will hear the sound lose its
low frequencies; to clearly hear this effect, make sure not to set the cut-off
frequency of the low-pass filter too low as the sound will be too soft.
Change the range of the oscillator from 8” to 16” with the FEET 1 fader.
Change the range of the oscillator
Now increase the release time (R) of the VCA1 to the value 1000 ms so that the
sound persists after the release of the keys. Be sure to set the level of the
general sustain fader (S) to 0, so that the changes on the release time can be
effective.
Increase the VCA release time
Now you can add all the parameters you want, like changing the oscillator
waveform, activate the sine waveform, change the filter attack.
5.1.2
The modulation matrix
We will discover one of the many additions to the CS-80V: the modulation
matrix.
To begin, open the matrix hatch by clicking on its bottom-left corner:
