INSTALLATION STEPS
1. Check that all the installation pack contents have been received. There should be 1 item
as shown below plus the towel warmer:
2.
2.
2.
2.
Determine location of towel warmer near a electrical outlet. The towel warmer cord is 4 ’
long.
Note: where possible, attach at least two of the brackets to a firm wall stud.
Note: where possible, attach at least two of the brackets to a firm wall stud.
Note: where possible, attach at least two of the brackets to a firm wall stud.
Note: where possible, attach at least two of the brackets to a firm wall stud.
3. Attach bracket pieces 1,2,3, and 4 to towel warmer using diagram 1 below as a guide.
Typically the brackets are positioned between the 2nd and 3rd bars from the top and
bottom. To allow maximum hanging space for the towel, position brackets as near to the
edges as possible.
Brackets
Diagram 1
#8 Cap
#1 Securing
Bolt
#2 Front Cylinder
Head
Horizontal Bars
#3 Rear Cylinder Head
#4 Inner Rear
Cylinder
#5 Wall Fixing
Screw
#7 Locking Screw
#6 Outer Rear Cylinder
