Troubleshooting
Image is Blurred
Possible Causes
1. The Projector is not in focus.
2. The Projector is offset from plane/angle of operation.
Solutions
1. Adjust the focus with the focus adjustment dial until the image comes into focus.
2. Move the projector so that it is both 180 degrees and on an even plane with the
screen. It can also be adjusted with keystone settings.
No Sync, No Signal
Be sure to set up the computer to enable a video signal output. On some laptops
this is done by pressing and holding Function Key F5. If using the projector as an
external monitor on Windows based systems, this can be done by selecting “extend
my desktop to this monitor”. The native resolution of the projector is 1280x720.
Depending on your computer’s video driver, different resolutions may need to be
selected for proper output.
44
