5
area when installing the module.
INSTALLATION INTO AN INFINITE BAFFLE
1.
Use the provided Cut-out Template to mark the desired wall location.
Be sure that no piping,
wall studs, or electrical wires interfere with the placement of the RCC300-SM.
2.
Once the hole is cut and the speaker wire is run, manage the speaker wire around the
RCC300-SM.
3.
Connect the bare speaker wire ends to the spring-loaded binding posts.
4.
Install the RCC300-SM into the cut-out made in the wall.
5.
Carefully tighten the four dog leg clamps on the RCC300-SM using a #2 Philips Head
Screwdriver
.
6.
The grille for the RCC300-SM is held in place by magnets. Simply position the grille on the
front of the module into the recessed area.
NOTE: While installing the subwoofer module ensure any excess wire is run properly
so it does not interfere with the driver’s operation.
