EPC-26A/27 Hardware Reference
Page 34
5
5
EXM CONFIGURATION ERROR
BIOS
Problem
:
The EXMs installed (or not installed) do not match the configuration
information in the BIOS setup EXM menu.
Solution(s)
: Run the BIOS setup program. Enter the EXM menu. Verify the
information listed on the screen, save any changes and reboot.
If necessary, refer to the section
EXM Setup Screen
, in Chapter 2 of
this manual and/or your EXM manual(s) for more details.
DISKETTE DRIVE A ERROR
BIOS
Problem
:
The configuration information in the BIOS setup says that one or
more floppy disk drives are expected, but a floppy disk controller
could not be found.
Solution(s)
: If you have no floppy diskette drives, enter the setup program and set
both floppy drives to "NONE."
If you are using a floppy drive(s), verify that both the floppy
controller and the floppy drive(s) have power.
GENERAL FAILURE READING DRIVE ...
DOS
Problem
:
This almost always indicates the presence of an unformatted hard disk
partition or diskette.
Solution(s)
: Format the partition or diskette using the utilities supplies by your
operating system.
INVALID
DRIVE
SPECIFICATION
DOS
Problem
:
You are trying to access a logical drive (e.g., A:, B:, ...) that is not
known to the operating system.
Solution(s)
: Select a different logical drive. If you are trying to access a hard disk,
you may need to create the logical partition.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
