EPC-26A/27 Hardware Reference
2
2
Page 8
Note that there are some restrictions when setting up devices on the EPC-
26A/27. If you plan to boot from a non-IDE device, such as the resident Flash
memory, set the master drive as None and use the BIOS extension. You
cannot boot from Flash and still have an IDE drive; the IDE drive must be
drive C: if it is to be used. Flash BIOS extensions are enabled and configured
in the Advanced Menu.
Once you have completed the setup for the IDE Master, you can choose the
IDE Adapter 0 Slave Sub-menu to configure your second drive. When
finished, press the ESC key to return to the Main Menu.
Boot Sequence Sub-Menu
The Boot Sequence Sub-Menu allows you to change the boot sequence
options. The following displays:
PhoenixBIOS Setup - Copyright 1992-94 Phoenix Technologies Ltd.
Boot Options
Item Specific Help
Boot Delay: [0]
Boot Sequence [A: then C:]
POST Errors: [Enabled]
F1 Help Select Item -/+ Change Values F9 Setup Defaults
ESC Exit Select Menu Enter Select Sub-Menu F10 Previous Values
Floppy Check: [Enabled]
Summary Screen: [Enabled]
SETUP Prompt: [Enabled]
Figure 2-3. Boot Sequence Sub-Menu.
Boot Delay:
Use this option to set the system to delay booting for a time period in seconds
that you set. This allows for long start up times on boot devices that spin up
slowly. The default is zero.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
