
GENERAL OPERATING/WARRANTY MANUAL
FOR CHILLER, FREEZER AND HEATED DISPLAY CABINETS
9
With under-bench and cake displays, they have a
removable screen that needs to be pulled out and washed
in warm soapy water, dried and re-installed.
You may also need to clean the condenser fins as well.
Door gaskets should be cleaned once a week with mild
soapy water followed by a fresh rinse.
Inside and body should be cleaned using mild soapy
water. Always wipe dry.
If stainless steel, use an appropriate cleaner,
following all instructions.
Never use bleaches, chlorine or any products containing
these products as they will cause corrosion.
With all sliding doors, rollers should be kept clean and
lubricated with a silicon spray (food grade) or similar.
Always be careful with sharp edges, and wear suitable
protection to avoid injury.
Summary of Contents for LCF-411-RS
