Introduction
5
1
Introduction
This section contains information about the basic features and applications of
the ES1231.1-A ETK Interface Board (ETK = Emulator Test Probe). A block dia-
gram is also included here to show the schematic layout of the interface board.
1.1
Applications
The ES1231.1-A ETK Interface Board is designed for VME64x systems with 3 U
height. It enables a very high-performance integration of the ETK into the
ES1000 system for memory emulation and particularly data acquisition.
Thanks to a new block transmission mode, the ES1231.1-A is much faster than
its predecessor models ES1200.1/ES1201.1.
Features
The ES1231.1-A has the following features and components:
•
Motorola MPC555 40-MHz processor
–
1 MByte SDRAM (32-bit, burstable)
–
1 MByte Flash (16-bit)
•
transfer rate of 8 MBit/s
•
’single mode’ and ’block mode’ data transfer from and to the ETK
•
Data Acquisition Memory Controller (DAMC) for linking the ETK to the
ES1000 system in real time
•
automatic detection of the ETK type
•
configuration of the ETK
•
16 independent acquisition time frames possible
•
VME64x interface
•
up to 4 serial ETK interfaces (e.g. four ES1231.1-A boards) can be operated
simultaneously on an ES1000.
note
Some components of the interface board may be damaged or destroyed by elec-
trostatic discharges. Please keep the board in its storage package until it is
installed.
The board should only be taken from its package, configured, and installed at a
work place that is protected against static discharge.
ES1231_1-ug-en.book Seite 5 Montag, 12. Mai 2003 12:37 12
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
