3 of 6
SET-UP
SET-UP (cont’d.)
4. Install the adjustable length E-track cam-buckle
strap in the desired E-track slot location. Route the
strap around the front of the cooler as shown in fig.
4.
Note: If you have chosen to use one of the alternate E-track
slots, route the strap accordingly.
5. Install the adjustable end of strap into the fixed
end’s cam buckle and tighten strap down. Once
fully tightened, cut the excess strap (if desired)
using a pair of scissors.
Remove the beverage cooler from the beverage
cooler holder prior to the next step.
6. Once the strap is cut to length, use a heat gun or
lighter to singe the cut end of the strap to make
sure that the strap does not fray. See fig. 6.
Note: One E-track cam-buckle strap is provided in the
kit. However, the mount was designed with many E-
track and bungee cord slots to allow the user the option
to add more straps or bungee cords, as desired.
Fig. 4
(install adjustable length hold-down strap end)
Fig. 6
(cut adjustable length hold-down strap end)
Cut and singe
Hold-down strap
CAUTION:
