Matrix-512 User Guide
‧
9
‧
4. Artila Utility Software
The introduction of Artila utility software as follow:
4.1 update
Update loader, kernel or root file system image. Also use
update
—FORMAT
to format user disk.
Type
update
—help
to find the command usage.
Update can only operated under supervisor mode (password: root).
4.2 setuart
Configure serial port setting. An example show as followed to configure port 1 as RS-485 interface
with baud rate 921600. Please note only port 1 support 9-bit data at RS-485.
4.3 gpioctl
gpioctl is used to control the programmable digital I/O port located on the DB25 connector. Following
example is to configure DIO1 as digital input and DIO2 as digital output with low output state.
