How to clean: Cavity
embossment
Clean the cavity embossment to remove
limestone residue after cooking with
steam.
Step 1
Step 2
Step 3
Pour: 250 ml of white vine‐
gar into the cavity emboss‐
ment. Use maximum 6% vin‐
egar without any additives.
Let the vinegar dissolve the
limestone residue at the am‐
bient temperature for 30 mi‐
nutes.
Clean the cavity with warm
water and a soft cloth.
For the function: True Fan Cooking PLUS clean the oven for every 5 - 10 cooking cycles.
How to remove: Shelf supports /
catalytic panels
Remove the shelf supports / catalytic
panels to clean the oven.
Step 1
Turn off the oven and wait un‐
til it is cold.
Step 2
Pull the front of the shelf sup‐
port away from the side wall.
Hold the rear of the shelf sup‐
port and catalytic panel in
place. The catalytic panels
are not attached to the oven
walls. They can fall out when
you remove the shelf sup‐
ports.
Step 3
Pull the rear end of the shelf
support away from the side
wall and remove it.
2
1
Step 4
Install the shelf supports in
the opposite sequence.
The retaining pins on the tele‐
scopic runners must point to
the front.
How to use: Catalytic cleaning
There are catalytic panels in the cavity. It
absorbs fat during catalysis.
Spots or discolouration of the catalytic
coating have no effect on the cleaning.
28
Summary of Contents for AODEC70X
