9
CONTROLS
INPUT CONNECTORS
AHnet: RJ45 CAT5 connector for addressable RS422 control. There is a
loop through connector to use as signal RS422 output. You can connect
up to 30 monitors on the same RS422 bus
Termination: Active (ON) the termination ONLY on the last monitor of
the RS422 bus
ADDRESS: Configure the AHnet unit address on RS422 bus to individually
control the unit using RS422 AHnet protocol
SERVICE: Used for firmware upgrade
12V D.C.: Power supply input connector
1.
OPEN/CLOSE button:
Press this button to open or to
close the connection box.
Make sure that no objects or
body parts can obstruct the
movements.
