10
AHLINK
AHlink is used to control and set-up the unit.
By default, the AHlink signal on the unit is deactivated. To activate the
AHlink signal, press during 5 seconds the Up and Down button located
on the cover plate.
The unit will automatically deactivate the AHlink signal if there is no
device (mobile or tablet) connected during more than 2 minutes.
To control and diagnose the unit by using AHlink, download “AHlink”
from App Store (IOS system) or from Google Play (Android system). The
App is free. Execute the “AHlink” on your cell phone.
To control and set-up the unit using AHlink, download AHlink App from
the App Store (IOS system) or from Google Play (Android system). The
App is free. Execute the AHlink App on your mobile phone.
On the AHlink App options, it
is recommended not to select
Auto Connect and select Portrait
on Orientation. To connect to
the device, select Scan for local
devices.
In the App’s options, it is not
recommended to select “Auto
Connect” and select “Portrait”
on “Orientation”. To connect to
the device, select “Scan for local
devices”.
