14
AHLINK
AHlink is used to control and set-up the unit.
By default, the AHlink signal on the unit is deactivated. To activate the
AHlink signal, press for 5 seconds the external Up and Down screen
buttons located on the cover plate, or press for 5 seconds the UP and
Down contact close on the GPI connector. You can also activate the
AHLink signal with the LCD located under the monitor. Press the Down
key near the LCD, until the "<AHLink> ¨option appears. Press the OK
button to activate the AHLink signal on the unit. When the AHlink signal
is activated, the sound of 5 beeps will indicate that the AHlink signal is
active on the unit.
The unit automatically deactivate the AHlink signal if there is no device
(mobile or tablet) connected for more than 2 minutes. The user can also
deactivate the AHlink signal using the APP on mobile or tablet. When the
AHlink signal is deactivated, the sound of long beep will indicate that
the AHlink is not longer available
on the unit.
To control and set-up the unit using
AHlink, download AHlink App from
the App Store (IOS system) or from
Google Play (Android system). The
App is free. Execute the AHlink App
on your mobile phone.
On the AHlink App options, it
is recommended not to select
Auto Connect and select Portrait
on Orientation. To connect to
the device, select Scan for local
devices.
