9
CONTROLS
Remote IR control
POWER
Switch ON/OFF the monitor
MENU
Activates the OSD menu on screen
UP
Cursor control up on the OSD menu
DOWN
Cursor control down on the OSD menu
LEFT
Cursor control left on the OSD menu
RIGHT
Cursor control right on the OSD menu
OK
Selects the function on the OSD menu. When the OSD
menu is not active on screen, selects the input source
Monitor address
Below the monitor, there is a screen to configure the monitor. Press
the UP or DOWN buttons to change the function. Press the OK button
to select the function. Change the parameter using the UP or DOWN
buttons and press OK again to save the changes.
AHNET ID
Selects the number AHnet ID to RS422 to externally
control the monitor
INPUT SELECT Selects the input source signal (DVIA, DVI1 or DVI2)
BRIGHTNESS
Configuration of the monitor brightness level
CONTRAST
Configuration of the monitor contrast level
BACKLIGHT
Configuration of the monitor backlight level
STATUS INFORMATION List of the monitor status to service
AUTO ADJUST Speed and protection automatic adjustment
