19
Input connectors
MICROPHONE INPUT CONNECTORS
Settings:
6 dip switch to configure the DynamicTalk.
DIP SWITCH
FUNCTION
1,2,3
ON:
Dynamic Talk configured in PA mode. The T push
button controls the microphone mute function
OFF:
DynamicTalk configured in conference mode. The
TALK push button has no function, the contact close
is available on GPO connector and the LED ring is
controlled externally (GPI)
4,5
Factory only. Leave those dip switches off
6
Termination of the RS422 bus. Configure to ON only on
the last device of the RS422 bus
AHnet:
RJ45 CAT5 connector for addressable RS422 control. There is a
loop through connector to use as signal RS422 output. You can connect up
to 30 devices on the same RS422 bus
AHnet ADDRESS:
Using the AHnet protocol, this is the number of the
device into the RS422 addressable bus
