11
Controls & Input connectors
OSD MONITOR CONTROL
Use the IR remote control to configure the image and select the input signal
POWER
Switch ON/OFF the monitor
MENU
Activates the OSD menu on screen
UP
Cursor control up on the OSD menu
DOWN
Cursor control down on the OSD menu.
When the OSD menu is not active on
screen, selects the input source
LEFT
Cursor control left on the OSD menu
RIGHT
Cursor control right on the OSD menu
OK
Selects the function on the OSD menu
MONITOR ADDRESS
To configure the monitor address on the RS422 AHnet, use the screen at
the bottom of the monitor:
Changing the monitor address:
– Push
OK
. One beep sounds
– Change the monitor address using
the
UP
/
DOWN
buttons
– Push
OK
. Two beep sounds, indicating
that the new address has been saved
