C. The appliance has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits a marked change in performance.
Caution!
There are no user serviceable parts inside this unit. Do not attempt any repairs yourself, doing so will void
your manufacturer warranty. In the unlikely event
your unit may require service please contact us.
Cleaning:
Due to fog residue, smoke, and dust cleaning the internal and external optical lenses must be carried out
periodically to optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the outside casing.
2. Clean the external optics with glass cleaner and a soft cloth every 20 days.
3. Always be sure to dry all parts completely before plugging the unit back in.
Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke, fog residue, dust, dew).
LED WALL WASH LIGHT Features
Multi-voltage: AC100-240V, 50/60Hz
Power Consumption: 400 watts
Light source: 14pcs 30W 3 in 1 LEDs
Beam angle: 40 degree lens
IP 65 outdoor rated, Die cast case LED Wall Washer
Low noise operation, convection cooled
Long Life LED (rated at 50, 000 Hours)
Operational modes: DMX512, Master-Slave, Stand-Alone, DMX-512 Protocol
8/19/42 DMX Channel Modes
3 pin XLR data input & output
Electronic Dimming: 0 - 100%
Linear RGBW color mixing allows for infinite color possibilities
Flicker free - ready for TV / Video use
LED display with easy to use function keys
Color strobe effect
Low power consumption
Very low heat output
Run all night
Mounting bracket designed for floor, wall or truss mount
N. W: 10KG G. W.: 12KG
Dimensions (LxWxH): 1000x110x170MM
LED WALL WASH LIGHT Set Up
Notice:
Be sure to follow figures two and three when making your own cables. Do not use the ground lug on the XLR
connector. Do not connect the cable’s shield conductor to the ground lug or allow the shield conductor to come in
contact with the XLR’s outer casing. Grounding the shield could cause a short circuit and erratic behavior.
