5
In the Controller mode, at the last xture in the chain, the DMX output has to be connected with a
DMX terminator. This preventselectrical noise from disturbing and corrupting the DMX control
signals.
The DMX terminator is simply an XLR connector with a 120Ω(ohm) resistor connected across pins 2
and 3, which is then plugged into the output socket on the last projector in the chain. The
connections are illustrated below.
Projector conguration can be set conveniently via press button switch and LCD display.
To browse or change its setup options, Press button ENTER to unlock panel. Menu will be displayed
on the screen, each menu has it own sub-menu. Each menu has specic function, Please refer to
“
Operation Menu
” for details.
Press button UP or DOWN if you want to browse or change through the various Setup Options.
Press button ENTER to save your settings or enter the next menu.
Press button UP or DOWN to change values.(Add or subtract)
Press button FUNC , it will return to the upper menu one by one.
Each projector must be given a DMX start address so that the correct projector responds to the
correct control signals. This DMX start address is the channel number from which the projector
starts to “listen” to the digital control information being sent out from the controller. The xture
have 3 DMX modes. There are simple mode, standard mode and extended mode. For example
standard mode has 18 channels, so set the No. 1 projector’s address 001, No. 2 projector’s address
019, No. 3 projector’s address 037, No. 4 projector’s address 055 and so on.
Launch the projector. Press button ENTER more than 5 seconds to unlock panel.
Press button ENTER to display
DMX address
.
Press button UP or DOWN , you can set the address.
Press button ENTER to conrm, which means the projector has saved the Start Address
automatically, when powered on next time, it will display the value saved last time.
Press button UP or DOWN to change values.(Add or subtract)
Press button FUNC , it will return to the upper menu one by one.
DMX TERMINATOR
DMX TERMINATOR CONNECTION
Connect a 120Ω
(OHM) resistor
across pins 2 and 3 in an XLR plug
and insert into the DMX out socket on
the last unit in the chain.
SETUP OPTIONS-PROJECTOR CONFIGURATION
TO SET THE DMX START ADDRESS
FUNC
DOWN
UP
ENTER
1
2
3
120Ω
PIN2
PIN3
Unused
Unused
200~224
225~255
Unused
175~199
Gobo Index
0~127
Gobo
Rotation
Prism Rotation
Gobo Forward Rotation From Fast To Slow
Stop Rotation
Gobo Reverse
Rotation From Slow To Fast
0 - 540 Angle Degree Indel
128~190
191~192
193~255
0~127
Forward Rotation from Fast to Slow
Stop
Reverse Rotation from Slow to Fast
128~190
191~192
193~255
11
13
19
13
15
21
14
16
22
Focus
Line Focus
0~255
16
18
24
Function
"
Stay
in
a certain
value
for
more
than
5
seconds
"
Unused
Unused
Reset: Complete
Unused
Reset: Pan Tilt
Unused
Reset: Effects
0~24
25~49
50~74
75~99
100~124
125~149
150~174
140~149
150~202
Gobo 7 Shak From Slow To Fast
Forward Rotation Effect From Fast To Slow
203~255
Forward Rotation Effect From Slow To Fast
10
12
18
Rotation Gobo
Wheel
Prism Excluded
Prism Inserted
0~127
128~255
Prism Insertion
12
14
20
No Function
0~50
Preset Program 1
Preset Program 2
Preset Program 3
51~100
101~150
151~200
Preset Program 4
201~255
15
17
23
Call Program
12
