Press this button in order to interrupt the alarm and activate the snooze function.
Press it and hold for 2 seconds in order to switch off the alarm clock for 24 hours.
1. [SNOOZE] button
Turn the regulator right or left to choose the colour of the light (from 256 available colo
-
urs).
Press the [Colour] regulator to turn on/off the light colour change
2. [Colour] regulator to set the lighting colour
3. LCD screen
In the normal mode, press the button and hold it for 2 seconds to open the time setting
mode.
In the time setting mode, press the button once again to proceed to further settings.
4. [TIME] button
In the normal mode, the button serves for switching between channels 1-3 of external
sensors.
In the normal mode, press and hold the button for 2 seconds in order to activate the auto
-
matic switch-over mode for reading of the data form channels 1-3.
In the automatic switch-over mode, press the button once in order to go back to the
normal mode.
In the setting mode, press the button in order to raise values of specified parameters.
Holding the button down will allow you to set the values quicker.
6. (CHANNEL/ +) button
The button serves for setting of alarm clock parameters.
5. [ALARM] button
3
Description of the device
