1.
In the normal time mode, press the [TIME] button and hold it for 2 seconds to switch the
time format to 12- or 24-hours.
4.
Press the [TIME] button to save the settings and to close the setting mode. If you do not
press any button within 60 seconds, the station will close the setting mode automatically.
3.
Press the [TIME] button again to switch the parameter that you set. Parameters appear in
the following order: time format 12/24 hours minutes seconds
time zone +- 23 hours summer time AUTO/Switched off
2.
With the use of [Channel/ +] and[MAX./MIN./-], set the desired format of time display
(holding the button down will speed up the setting process).
Time settings
12
If you are beyond the reach of the time signal transmitter or if the format of the signal is
wrong, you can set time manually. Once the station receives the time signal from the trans
-
mitter once again, the clock will synchronise automatically with the received data.
s1 weather station configuration
