Alarm Clock settings
In the normal time display mode, press the [ALARM] button to check alarm clock
settings.
Press the button once again to turn on/off the alarm clock function. A bell icon will
appear or disappear on the screen then.
1. Turning on or off the alarm clock
In the normal time display mode, press the [Alarm] button and hold it for 2 seconds. The
digits corresponding to the hours of alarm clock will start flashing which means that you
can go to the settings.
Use [Channel / +] and [Max./min./-] buttons to change the hour value (holding the button
down will speed up the setting process).
The above-described alarm clock setting process should be one in the following order:
Hours Minutes.
Press the [Alarm] button to save settings and to close the setting mode. If you do not
press any button within 60 seconds, the station will end the setting mode automatically.
When you set the wake-up time with displayed icon, the alarm clock will turn on
automatically.
Press the [SNOOZE] button to turn off the alarm clock signal and to turn on the snooze
(the alarm clock icon will be flashing then). The alarm clock signal activates again after
5 minutes and the snooze function will be activated constantly for 24 h.
If you do not press any button within 2 minutes, the alarm clock signal will turn off auto
-
matically.
You can also press and hold the [SNOOZE] for 2 seconds or press the [Alarm] button to
tun off the alarm clock sound. The alarm will ring again on the next day at the same time.
2. Setting the wake-up time
Warning!
13
s1 weather station configuration
