
P 8
Changing the opening side of the door
Your wine cabinet’s door is reversible.
First, unload the bottles from the cabinet.
- Close the door.
- Carefully remove the grommets (picture 4) (5 grommets).
- Remove the plastic hinge cover, by first pulling it forwards then lifting it up
(picture 3).
- Unscrew the three top screws (picture 1), using a T25 Torx wrench whilst hol-
ding the door to prevent it from falling.
- Remove the upper hinge (picture 2).
- Turn the door through180°.
- Unscrew the three bottom screws (picture 1a), using a T25 Torx wrench.
- Remove the lower hinge (picture 5)
- Replace all the parts (the left parts go on the right, the right parts go on the left).
WAIT 48 HOURS BEFORE PLUGGING IN YOUR APPLIANCE
When moving your cabinet, never tilt it more than 45°, and always on the lateral
side (the side where the electrical lead is located).