ArteVino COSY Series, User Manual

Page: 14 / 51

EN
10
9
Schéma 2
Schéma 1
1
Unscrew the three screws using a"T25" Torx wrench.
2
Remove the upper hinge.
3
Carefully remove the caps using a thin blade.
4
Remove the cabinet door by opening it slightly, then lifting it
upwards.
5
Unscrew the door pin.
6
Carefully remove the caps using a thin blade and replace with
the pin.
Reposition the cap on the opposite side.
7
Turn the door through 180°.
8
Put the door back onto its pin.
9
Put in place the upper hinge.
10
Screw the hinge so that the door is completely parallel to the
cabinet. Check that the seal adheres firmly to the cabinet
(by closing the door), to ensure it is completely airtight.
11
Put in place the caps.
V. Door reversibility
This allows you to change its direction of opening. Proceed as follows (example for changing a right-hand door to a left-hand door):
x3 x4 x3
C E
x3
D B G F H J A
1
2
4
3
6
5
10
9
11
7
A
Upper hinge
B
Caps
C
Caps
D
Torx screw
E
Screw
F
Door catch
G
Lower hinge
H
Door pin
J
Door pin cap
To install bottles on a storage shelf, proceed as follows:
Layout of a shelf in storage version:
6- Loading and layout advice
Each shelf can be used as a storage, sliding or display shelf. The shelves of your cabinet have 8 recesses allowing you to store your bottles
in complete safety.
1
2
3
1
Guides (x2)
2
Shelf – 8 recesses
3
Dowels (x2)
STOCKAGE 26 bouteilles (6 + 20)/ OEM DE DIETRICH
30 traditional Bordeaux bottles
maximum
Bottle capacity
in this storage layout
Diagram 3
N.B.: 10 locking dowels are provided in the accessories bag.
N.B.: the glass door is very heavy. Take all necessary
precautions to ensure that you do not injure yourself
or drop it.
1
Insert 2 guides in the shelf support strips provided. For each
shelf, position a guide on the right and a guide on the left (see
diagram 1). Ensure that you securely clip the guides into their
slot (see diagram 2).
2
Place the shelf in the 2 guides (see diagram 3).
3
Place a locking dowel in each of the 2 holes located at the
front of the shelf, on the upper section. These dowels then fix
the shelf with respect to the guide and prevent any unwanted
movement of the shelf.
4
Start by placing the bottles in each recess of the back row,
with the base of the bottle towards the back.
5
Continue with the front row, putting the bottles in the
opposite direction.
6
Continue stacking the bottles, taking care to ensure that none
of the bottles touches the back wall.
Diagram 1
Diagram 2