EN
8
7
•
The wine cabinet’s 4 feet are adjustable in height so that you can
adjust its height beneath the work top or inside the unit and align
the door with adjacent units.
•
If necessary, use the hexagonal raising pieces, which you will find in
the “accessories” bag.
•
Tilt the appliance forwards, ensuring that the door remains closed.
•
Unscrew the back feet and install the raising pieces using a 17 mm
open-end wrench.
•
Screw the 2 rear feet back onto the raising pieces.
•
Repeat this procedure for the 2 front feet, ensuring that you tilt the
appliance backwards.
•
Never obstruct the front air vent as this could cause the wine
cabinet to operate incorrectly.
•
Use suitable screws to fasten your wine cabinet beneath the work
top or inside the unit via the holes provided in the hinges.
•
Precautions: on the side of axis of rotation of the door, position the
door at least 3 mm away from the adjacent unit.
Dimensions to observe:
A min. A max. B
Cosy (glass door)
816
832
549
600 min.
821 min.
560 min.
C
594
B
A
IV. Flush-fitting
Changing the hinges to flush-fit the cabinet
1
Unscrew the three screws using a “T25” Torx wrench.
2
Remove the upper hinge.
3
Carefully remove the caps using a thin blade.
4/5
Assemble the hinge with a pin
B
using screws so that the
door is completely parallel to the cabinet.
6/7
Assemble the hinge without a pin
A
using the screws.
Precautions: if you remove the cabinet’s glass door, never stand it
on its edges or it could break.
Precautions: When closing the door, check that the seal adheres
firmly to the cabinet to ensure that it is completely airtight.
1
2
3
7
6
4
5
A
B
1
2
3
3 mm
Installing a cabinet at a height inside a unit
For safety reasons, we do not recommend installing the
wine cabinet inside a unit.
If you decide to do so, have a unit specially designed or
checked by a furniture specialist to ensure that the unit
supporting the appliance, as well as the adjacent units, can
support the weight of the cabinet filled with full bottles,
i.e. 200 kg. Have this specialist guarantee the stability
of the cabinet when opening the door and pulling out
shelves filled with full bottles.
x6
A
B
C
D
A
Hinge without pin
B
Flush-fitting hinge
C
Raising piece
D
25 Torx screw
The plug must be accessible after your appliance has
been installed.
Summary of Contents for COSY Series
Page 51: ......
