Artesyn RTM-ATCA-9305 IO, Installation And Use Manual, Page: 56 / 64

Functional Description
RTM-ATCA-9305 IO Installation and Use (10010926-05 )
56
4.5 Serial Debug Port
The console port for the management processor is accessible via the front panel mini-B USB
connector. The supported baud rate for this port is 9600 bps.
The serial debug port can be used to execute raw IPMI commands in SIPL protocol.
+3.3V PP Voltage 0x21
+2.5V PP Voltage 0x22
INLET temp RTM Temperature 0x23
OUTLET temp RTM Temperature 0x24
Switch Temp Temperature 0x25
+1.8V PP Voltage 0x26
+1.2V PP
Note: This sensor is available with I/O variant 12x1G+2x10G
(Config 2) ONLY. Voltage 0x27
+1.1V PP Voltage 0x28
Table 4-1 IPMI Sensors (continued)
Sensor Name Sensor Type Sensor Number
Table 4-2 Serial Debug Connector
Pin Signal
1 no connect
2 PQ_CONSOLE_RX_C
3 PQ_CONSOLE_TX_C
4 no connect
5 signal ground
6 chassis ground
7 chassis ground