Artesyn RTM-ATCA-9305 IO, Installation And Use Manual, Page: 30 / 64

Hardware Preparation and Installation
RTM-ATCA-9305 IO Installation and Use (10010926-05 )
30
If you integrate the RTM in your own non-Artesyn system, contact your local sales
representative for further safety information.
Table 2-1 Environmental Requirements
Requirement Operating Non-Operating
Temperature +5ºC (41ºF) to +40ºC (104ºF)
(normal operation) -40ºC (-40ºF) to +70ºC (158ºF)
This may be further limited by
installed accessories.
Temperature Change +/- 0.25ºC/min +/- 0.25ºC/min
Relative Humidity 5% to 95% non-condensing
according to Artesyn-internal
environmental requirements 5% to 95% non-condensing according
to Artesyn internal environmental
requirements
Vibration 0.1 g from 5 to 100 Hz and back
to 5 Hz at a rate of 0.1
octave/minute 5-20 Hz at 0.01 g
2
Hz
20-200 Hz at -3.0 dB/octave
Random 5-20 Hz at 1 m
2
Sec
3
Random 20-200 Hz at -3 m/Sec
2
Shock Half-sine, 11 m/Sec, 30
mSec/Sec
2
Module-level packaging
Half-sine, 6 msec at 180 m/Sec
2
Free Fall - 1,200 mm/all edges and corners
1.0 m (packaged)
100 mm (unpacked)
Product Damage
High humidity and condensation on surfaces cause short circuits.
Do not operate the product outside the specified environmental limits. Make sure the
product is completely dry and there is no moisture on any surface before applying power.