Artesyn Embedded Technology SharpStreamer Mini PCIE-7205, Installation And User

Page: 55 / 110

Controls, Indicators, and Connectors
SharpStreamer™ Mini PCIE-7205 Installation and Use (6806800U01A)
55
4.2 LEDs
The PCIE-7205 card has a set of four (4) red and four (4) amber LEDs and eight (8) green debug
LEDs.
The LEDs derive their power from the PCIe gold finger 3.3 V power. If the CPLD does not
illuminate all the debug LEDs on power up it means that CPLD does not have 3.3 V power from
the PCIe gold fingers. In such cases, first check if the card is receiving 3.3V from the PCIe slot or
not.The front panel LEDs are used to indicate the basic power state of the card. All the LEDs are
shown on the primary side of the card.
25 GND Ground PERp2 PCIE1 EDGE RX P
PCIE1 EDGE RX N
Receiver Lane 2, Differential
pair
26 GND Ground PERn2
27 PETp3 PCIE3 EDGE TX P
PCIE3 EDGE TX N
Transmitter Lane 3,
Differential pair GND Ground
28 PETn3 GND Ground
29 GND Ground PERp3 PCIE1 EDGE RX P
PCIE1 EDGE RX N
Receiver Lane3, Differential
pair
30 RSVD Reserved PERn3
31 PRSNT2# PCIE EDGE PRESENT X4; this
net is connected to pin A1
through the PCIe7205 card
to show x4 present card in
the system. GND Ground
32 GND Ground RSVD Reserved
End of the x4 connector
Table 4-1 PCIE-7205 Card Edge Connector Pinout (continued)
Pin #
Name
Side B Description Name Side A Description