manualshive.com logo in svg

Artesyn Embedded Technology SharpStreamer Mini PCIE-7205, Installation And User

Share
Download
Artesyn Embedded Technology SharpStreamer Mini PCIE-7205 Installation And User Download Page 36

Hardware Preparation and Installation

SharpStreamer™ Mini PCIE-7205 Installation and Use (6806800U01A

)

36

2.4.1

PCIE-7205 Card Installation

To install the PCIE-7205 card, perform the following steps:

1. Use anti-static pads and attach an ESD strap to your wrist. Attach the other end of the ESD 

strap to an electrical ground (For more details, refer to the section 

Precautions

 

on page 32

).

2. Identify the system in which the PCIE-7205 card is to be installed.

3. Remove the system cover and ensure whether the host system has the required PCIe slot 

(with a minimum x4 PCIe connector) to hold the card.

4. Insert the PCIE-7205 card into the PCIe slot, secure it, and ensure that the card is properly 

fitted in the PCIe slot. 

5. Lock the slot ejectors, close the system cover and then power on the system. 

For detailed information about the PCIe card installation, refer to the respective rack-
mount server manufacturer’s product documentation.

Make sure that the card has enough air flow after closing the system with the cover. 
Refer to respective rack-mount server manual for setting the fan speed accordingly.

The MCP transcoding performance is directly related to the airflow and cooling ability 
of the server in which the card is installed.

Summary of Contents for SharpStreamer Mini PCIE-7205















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands