Artel INFINITYLINK ILC205, Installation And Operation Manual

Page: 27 / 32

ILC205 Function Module Installation and Operations Manual 17
Removing an SFP or Module
Removing an SFP or Module
You can safely remove either the SFP from a ILC205 module, or the module from the host chassis while power
is applied to the module.
This section contains the following topics:
• Removing an SFP (page 17)
• Removing a Module (page 17)
Removing an SFP
To remove the SFP from a ILC205 module, perform the following steps:
1. Remove the fiber optic cables from the SFP.
2. Pull down on the SFP handle to dislodge it from the
module
.
3. Using the SFP handle, pull the SFP out of the
module
.
Removing a Module
To remove a ILC205
module
from the host chassis, perform the following steps:
1. Remove the Ethernet cables from the P1 - P3 RJ45 ports.
2. Remove the fiber optic cables from the SFPs.
3. Loosen the two mounting screws that secure the module to the host chassis.
4. Using the two mounting screws, pull the module out of the host chassis.
Caution
To avoid problems associated with overheating, do not leave a function module slot open when
power is applied to the chassis. Every module slot must contain a module or blank tray to ensure
proper ventilation when power is applied.