Artel INFINITYLINK ILC205, Installation And Operation Manual

Page: 24 / 32

14 ILC205 Function Module Installation and Operations Manual
ILC205 Function Modules
Table 7. ILC205 Front Panel Status LEDs
LED Indicates . . . State Description
P1/P2/P3 RJ45 port status Off Port disabled.
Green Link established.
Green (flashing) Link established with data activity.
Red (flashing) Loss link alarm, if enabled.
SFP1/SFP2 SFP port status Off No SFP installed or SFP disabled.
Green Link established, no activity.
Green (flashing) Link established with data activity.
Yellow (flashing) RX optical power high.
Red TX/RX fault, or RX low optical power.
Red (flashing) Loss link alarm, if enabled.
Understanding the Rear Panel Status LEDs
Table 8 describes the states of the ILC205 rear panel status LEDs as shown in Figure 6 .
Figure 6. ILC205 Rear Panel Status LEDs
Table 8. ILC205 Front and Rear Panel Status LEDs
LED Indicates . . . State Description
OK Module status -- Same operation as the front panel OK LED
(see
Table 7 ).
P1/P2/P3 Link Port status Off Port disabled.
Green Link established.
P1/P2/P3 Activity Port activity Off Port disabled.
Green Activity on link.
SFP1/SFP2 TX SFP laser status Off No SFP installed or SFP disabled.
Green Normal operation.
Red SFP TX fault.
(Continued)