Artel DigiLink DLC150E, Installation And Operation Manual

Page: 31 / 36

DLC150E Function Module Installation and Operations Manual 21
Removing the SFP and DLC150E Module
Removing the DLC150E Module
To remove the DLC150E from the host chassis, perform the following steps:
1. Remove the fiber optic cable from the SFP.
2. Remove the coaxial cable from the BNC connectors.
3. Remove the audio terminal block.
4. Loosen the two mounting screws that secure the DLC150E to the chassis.
5. Using the two mounting screws, pull the DLC150E out of the chassis.
Caution
To avoid problems associated with overheating, do not leave a function module slot open when
power is applied to the chassis. Every module slot must contain a module or blank tray to ensure
proper ventilation when power is applied.