14
DLC150E Function Module Installation and Operations Manual
DLC150E Function Module
Note:
When you do not install an SFP, the TX LED located on the DLC150E front panel will flash.
See
Table 6
for other LED status indications.
Figure 7.
DLC150E Module and SFP Installation
6. Insert the audio cable connector into the module’s cable connector as shown in
Figure 8
.
Figure 8.
DLC150E Audio Cable Connector
7. Secure the audio cable connector to the module using the two connector mounting screws.
8. Use the cable mounting screws to secure the audio cable connections described in the
“Cabling the Audio
Connections” section on page 15
.
Note:
Insert a blank tray in any unused chassis module slots to maintain proper ventilation.
SFP
(handle on top)
DLC150E Module
Mounting Screws
(2)
Connector Mounting
Screws (2)
Cable Mounting Screws
(12)
Audio Cable Connector
Summary of Contents for DigiLink DLC150E
