TECHNICAL SPECIFICATIONS
Power supply:
12 – 24 Vdc,
max. 1.4A@12 Vdc
max. 650 mA@24 Vdc
Advised Powersupply @12Vdc: PLN-60 (A9900351)
Advised Powersupply @24Vdc: PLN-60 (A9900361)
Lens angle:
60°
Optical window:
High-grade
polycarbonate glass
Luminous flux:
1300 Lm
White color temperature:
3.000K
Operating temperature:
-10°C - +50°C
Casing:
Stainless steel (316L)
Protection:
IP68
Dimensions:
Ø119 x 9 mm
Weight:
0.6 kg
Design and specifications subject to change without notice.
6
Turning on /off
Press the key-switch momentary.
Changing the color or mode of lighting
When the light is turned-off press the key-switch for 2 seconds.
Setting the Custom Color
At the selected Rainbow Color Spectrum mode press the key-switch momentary to turn the light off.
After that press the key-switch for 5 seconds or until the light is switched to the selected color and
then the Custom Color is set and selected.
Dimming
When the light is turned-on press the key-switch until the desired illumination is achieved. By another
pressing of the key-switch the luminosity will increase to the maximum illumination.
Set default
Press the key switch for min. 40 seconds or until the light is turned off.
Synchronization
When more than one multi-color underwater pool light is connected to the system the optional
Synchronization Unit LSU08 is recommended to synchronize the colors of lighting at the Rainbow
Color Spectrum mode of lighting. On the other case the colors of all installed lights would not be the
same after few minutes or hours of operation in the Rainbow Color Spectrum mode.
If the multi-color light is used only with one of the fixed color of lighting the synchronization is not
necessary.
Highlite international BV
Vestastraat 2
NL 6468 EX Kerkrade
The Netherlands
ARTECTA Division
Phone: +31-(0)45-5667734
Fax: +31-(0)45-5667709
E-Mail: [email protected]
