CONTENTS
Preface....................................................................................................................................................... 2
Precautions ................................................................................................................................................ 2
Features ..................................................................................................................................................... 3
Components and Connectors ..................................................................................................................... 3
Installation .................................................................................................................................................. 4
Controls....................................................................................................................................................... 5
Appearance................................................................................................................................................. 6
Technical Specifications.............................................................................................................................. 6
Declaration of conformaty............................................................................................................................ 7
PREFACE
The METEOR 120-RGB series of a compact ultra-thin underwater pool light with built-in driver is designed to
use the latest LED lighting technology.
The surface-mount designed casing enable very simple installation on the flat surface without any surface
preparation during construction and the max. diameter of the hole through the wall is 8 mm.
The METEOR 120-RGB with 316T stainless steel casings is available with RGB colors with 12 highpower
LEDs.
The multi-color RGB version allows changing of the color of lighting manually or automatically through the
complete rainbow spectrum.
The most advanced electronic design with built-in microprocessor enables network connection and simple
control of complete group of lights with dimming.
2
PRECAUTIONS
The underwater pool light has to be installed and used in accordance with the instructions of this manual
only.
The power supply has to be disconnected before installation.
The underwater pool light is recomended to be installed around 0.2 m below the water line for the best
illumination and to avoid over-heating.
The optical window must be clear and not covered by any kind of isolating or other material.
The optical window has to be cleaned with a mild soap or detergent and lukewarm water by using a soft
cloth or sponge. Do not use abrasive or highly alkaline cleaners.
Never scrape with razor blades or other sharp instruments. Benzene, leaded gasoline, acetone or carbon
tetrachloride should never be used.
Do turn power off immediately and refer servicing to qualified service personnel if the underwater pool light
does not operate normally following the operating instructions.
