Artecta Domotion DLC-4 RGB, Manual

Page: 10 / 16

9
Ordercode: A9915060/A9915061
Domotion DLC-4 RGB
1. Power function
When the DLC-4 is connected to a 12V or 24V power supply, the power button lights up. The device is
ready to operate and resumes with the last known settings. In normal mode you can press the Power
button for 2s and the device will switch to standby mode. The output will shut down. Press the Power
button again for 2s, the device will start up.
1.1 Shortcut power function
01) Press the P-button and the Power button simultaneously for 10 seconds until all buttons flash once.
The shortcut function is now ready to use.
02) If you press the Power button once, the DLC-4 will go to its standby modus.
03) Press any button to start up the DLC-4 .
04) To delete the shortcut, simultaneously press the P-button and the Power button again for 10 seconds
until all buttons flash once.
05) The shortcut is deleted.
1.2 Fadetime power function
01) Press the Power button for 5 seconds until all buttons flash once.
02) Release the Power button, the button will flash repeatedly.
03) You can set the fade time with the buttons according to Fig. 05.
Button 1 2 3 4 P/C/B/S
Fade time 1s 2s 3s 4s 0s (no Fade time)
Fig. 05
04)
After setting the fade time, all buttons will flash once to confirm the fade time.
05) The device will automatically switch to normal mode.
2. Built-in program
With this function you can choose a built-in program.
01)
Press the P-button for 1 second to activate the built-in programs.
02) The button clicks and will light up.
03) Scroll through the circular touchpad to choose between 10 built-in programs and the auto program.
The auto program will play the 10 built-in programs in sequence.
04) When a built-in program is chosen, a click will be heard.
05) The selected program will be activated.
3. Brightness
With this function you can set the brightness of the connected fixtures.
01)
Press the B-button for 1 second to activate the brightness menu.
02) The button clicks and will light up.
03) Scroll through the circular touchpad to set the brightness.
04) Turn clockwise to increase the brightness, turn counter clockwise to decrease the brightness.
05) The adjustment range is between 0-255, from minimum brightness to maximum brightness.
06) Each step will activate a click. If no click is heard, the minimum or maximum brightness is reached.