10
Then will pop up a window for login application, if hardware is
connected ready, the default username is Admin, Password is [1111],
click [Login] will login application immediately. If the hardware is not
ready yet, please install it as per below procedures.
5.1. Install USB Recorder Hardware
4 units of fonkorder1 can be installed to one PC at one time, the
device ID must be selected via the back switch behind device, so if
multiple fonkorder1 are used, please slide the switch to different
position to distinguish different device ID, else will detect the same
device if the switch at the same position.
5.2 Install Procedures
1. Connect RJ-11 phone port to Phone Jack of device, connect
RJ-11 line port to Line Jack of device;
2. Connect another RJ-11 phone port to Telephone set, connect
another RJ-11 line port to PSTN or C.O. line;
3. Connect USB port to USB Jack of device, connect another USB
terminal to PC or laptop.
