www. artlighting.cz
6
DMX table
DMX
Function description
1
Red
2
Green
3
Blue
4
White
5
Total intensity of the mixed color
6
Strobo
7
Memory
Optional DMX channels. The user can enable or disable the optional channels.
I.
Setting the DMX Address
Set the required DMX address with Up and Down Buttons. The new set address does not need
confirmation. With the display flash the device indicates the automatic storing of the new DMX
address.
LINK
Holding the up or down button will accelerate the scrolling through the DMX addresses.
On the right side next to the display the LED with the identification LINK is located. The lighting LED
indicates that the DMX signal is okay. If this LED is not lighting then the DMX signal is missing or is
wrong.
ATTENTION:
The exceptions are the border DMX addresses
1
and
506
. When the
001
is set then
holding the down button is used for entering the color storing menu. The display shows
C.01
When the
506
is set then holding the up button is used for entering the expanded opening and
closing menu of the channel No. 6 and 7 (see the Chapter V. and VI.)
081.