Arrow Z8 Encore! XP F6482 Series, User Manual

Page: 10 / 49

UM026302-0916 The Z8 Encore! XP
®
F6482 Series Development Kit
Z8 Encore! XP
®
F6482 Series Development Kit
User Manual
1
The Z8 Encore! XP
®
F6482 Series
Development Kit
This document describes how to set up the F6482 Series Development Kit (Zilog part
number Z8F64820100ZCOG) and use it to evaluate your Z8F6482-based designs and
applications. The Kit features a development board consisting of four LEDs, three push-
buttons, a buzzer/speaker, a 7.1 seven-segment LCD, a pyroelectric sensor, a phototransis-
tor, 32Mbit SPI Flash, port pin headers, and USB and UART ports. The Board features the
Z8F6482 MCU in a 80-pin LQFP package, plus a DBG connector to connect the Board to
a host development PC using Zilog’s USB SmartCable. To learn more about the Z8F6482
MCU, refer to the
F6482 Series Product Specification (PS0294) .
This document provides instructions for setting up and configuring Z86482 Development
Board and includes schematic diagrams and a discussion of Board features and ZDS II.
The first sections of this document guide you through the following tasks:
•
Download and Install the ZDS II Software and Documentation – see page 4
– Installing the USB SmartCable Driver – see Appendix B. Installing the USB
SmartCable Driver on page 36
•
Connect the F6482 Series Development Board to your PC – see page 6
• Start the Z8F6482 Demonstration Program – see page 8
Further details, including memory configurations, jumper settings, and a listing of sample
projects can be found in the
Z8F6482 Sample Projects section on page 30.
Figure 1 shows an image of the F6482 Series Development Kit.