Each screw in the wall requires a
washer.
1
Slide
side siding
into channels
of corner posts, flat edge upward,
bottom edge down resting on floor
frame. Always follow this pattern.
Fasten bottom edge and tab of stud to
floor frame using a screw. Fasten
center to stud with screws. Do not
fasten flat edge yet.
2
Install
side siding
as before. Note
how the slot in bottom edge must
overlap flat edge of last siding.
Fasten both siding panels to stud at
this overlap.
3
Install
side siding
to the top as
before.
4
From inside building, fasten siding
to corner posts using screws.
5
Repeat steps 1 through 4 for oppo-
site side of building.
NOTE
Be careful to install the correct
panel in each position as shown.
The floor frame must be square
and level or holes will not align.
●
●
●
●
●
9911 Side Siding (6)
●
Parts Needed For
●
Side Siding
Step 5
BH18
18
THIS SCREW MUST
FASTEN TAB OF STUD
STEP
2
STEP
3
Be certain all Siding
overlaps are fastened
with a single screw
Washer
9911
9911
End
View
Flat
Edge
Bottom
Edge
FRONT
STEP
1
STEP
4
