180°
180°
*ASSEMBLY UPSIDE DOWN
Assembly Instructions
Auntie Sewing Machine Cabinet
Page 7
Step 7.
Attach Partition (F) by guiding the
Connecting Bolts into holes in the Back Brace (P),
Back (O), and Front Assembly (K & Q) also allow
Dowels in the Front Assembly (K & Q) and Back
FIG. 7
FIG. 8
Brace (P) to enter holes in the Partition (F) (as
shown In FIG. 7). Turn cams to locked position
when complete.
Step 8.
Attach Compartment Back (M) to Partition
(F), aligning Cam holes with Bolts. Panel should be
flush at top and bottom, when aligned with Bolts,
turn Cams to locked position. Attach Compartment
Bottom (N) to partition (F), (taped edge to front)
again aligning with Bolts, turn Cams to locked
position. Attach Right Side (H) to Compartment
Back (M) and Bottom (N), turn Cams to locked
position (see FIG.8).
*ASSEMBLY UPSIDE DOWN
Remember to tighten the cams down
on ALL pieces once completed!
Remember to tighten the cams down
on ALL pieces once completed!
F
O
P
K
M
N
F
H
