Arrow Auntie 900, Owner'S Manual

Page: 18 / 28

Drawer Wood dowel
x8
DrawerCams x8
Drawer Connecting Bolts
x8
Assembly Instructions
Auntie Sewing Machine Cabinet Page 16
Step 26. Thread Connecting Bolts (8 total) into
pre-drilled holes in Drawers Front (R, Sx3).
Install Cams (8 total) in Drawer side (Zx4, Wx4) by
pushing a Cam into each hole flush with surface
(as shown in FIG. 24).
Step 28. Attach the Metal handle to the Top Drawers
Fronts (R,S) using 8/32x3/4” Bolt (x4) (as shown in
FIG. 27).
Step 27. Attach Top Drawer Sides (Z,W) to Drawers
Front (R,S), guide Connecting Bolts into holes in
Drawer Sides (Z,W), turn Cams to locked position.
Slide Drawer Bottom (Y) along grooves on the
Sides Into the Groove In Drawers Front (R,S) (as
shown in FIG. 25).
On the other side, attach the Drawer Back (T) to
Drawer sides (Z,W) with the #10x1-1/4” Flathead
Screw (x16) (as shown in FIG. 26).
FIG. 24
The Drawer may now be installed into your cabinet as
shown. The middle slot of the drawer side, slides onto
the drawer runner. Do not place the drawers on top of
the drawer runners.
FIG. 25
FIG. 27.
FIG. 26
#10x1-1/4”
Flathead Screw x16
Metal Handle
x4
#8/32x3/4”
Handle Bolts
x4
Y
R
W
W
Z
Z
T
T
180°
R
W
Z
S
S