Step 2
SX15 ctr
Parts Needed For
Frame Assemblies
The main frame pieces reinforce the
walls. This piece will later be installed
at the top edge of the side walls and
the rear wall. Proceed as follows:
1
Overlap the rear wall angle pieces
as shown in the figure and fasten
them together with one bolt in the
single, large hole.
2
Make two side wall angles by
overlapping the side wall angle pieces
as shown. Fasten each set together
with two bolts thru the second set of
large holes from each end.
3
Double check the length of each
and set these pieces aside for later
use.
10396 Rear Wall Angle (2)
10395 Side Wall Angle (4)
STEP
1
10396
10396
Side Wall Angles
140 3/8" 356,6 cm
3 3/4"
9,5 cm
Rear Wall Angle
118 1/8" 300,0 cm
4 1/2"
11,4 cm
10395
10395
STEP
2
4 1/2"
11,4 cm
3 3/4"
9,5 cm
(5)
15
