Arrow Storage Products WDA1012, Owner'S Manual & Assembly Instructions

Page: 21 / 36


9344 Siding Stud (10)

9365 Front Wall Channel (2)

Parts Needed For

Studs/Front Channel
Step 8
ZA18
DO NOT FASTEN TAB
AT THIS TIME
LARGE HOLE
9365
The studs provide a surface for at-
taching the siding panels.
1
Following dimensions, measur-
ing from the ends of angles place
2
studs
between each corner and
splice post on the sides and 1 on the
rear of building. Position stud inside
top angle and fasten with a screw.
9365
1
STEP
2
STEP
3
STEP
FRONT
47 9/16" (120,8 cm)
21 15/16" (55,7 cm)
29 3/16"
(74,1 cm)
2
Rest bottom tab (large hole)
outside fl oor frame. Do not fasten
tab at this time. Repeat procedure
for the remaining studs around the
building.
3
Fasten
front wall channel
into
position behind corner post and door
jamb. Fasten using three screws.
(12)
(4)
21