Arrow Storage Products WDA1012, Owner'S Manual & Assembly Instructions

Page: 19 / 36

1
Position right and left corner
posts
at the corner of the fl oor frame
as shown. The angled end of each
post must be placed on top of all 4
corners. Fasten the corner post to
the fl oor frame with 2 screws.
Support the corner posts with stakes
or other devices until door jambs are
attached.
2
Fasten the
door track assembly
(holes on top) behind the top of the
front corner posts using screws. See
the fi gure.
3
Fasten the
rear wall angle as-
sembly behind the top of the rear
posts using screws.

5284 Right Corner Post (2)

5285 Left Corner Post (2)

Door Track Assembly (1)

Rear Wall Angle Assembly (1)

Side Wall Angle Assembly (2)
Step 6
ZA16

Parts Needed For

Posts/Top Frames
NOTE
The remainder of the building assembly
requires many hours and more than one
person. Do not continue beyond this
point if you do not have enough time to
complete the assembly today. A partially
assembled building can be severely
damaged by light winds.
The top frame pieces give rigidity to
the side walls and provide a surface
for attaching the gables which sup-
port the roof.
4
Fasten the
side wall angle as-
semblies behind the top of the side
posts using screws. Side wall angles
overlap rear wall angle in corners.
The fl oor frame must be square
and level or holes will not align.
STEP
1
5285
STEP
3
STEP
2
STEP
4
5284
5284
5285
REAR
FRONT
SIDE
SIDE
10394
9366
Wall Angles
Must Face
Inside
Building
5986
Long Leg
On Top
Short Leg
on Bottom
Opening
Facing In
FRONT
Door Track Assembly
10394
TOP VIEW
(16)
19