Arrow Storage Products WDA1012, Owner'S Manual & Assembly Instructions

Page: 15 / 36

Step 2
ZA12

Parts Needed For

Frame Assemblies
The main frame pieces reinforce
the walls. These pieces will later be
installed at the top edge of the side
walls and the rear wall. Proceed as
follows:
1
Overlap the
rear wall angle
pieces as shown in the fi gure and
fasten them together with one bolt
in the center hole.
2
Make two side wall angles by
overlapping the side wall angle pieces
as shown. Fasten each set together
with one bolt thru the second large
hole from the end of each part.
3
Double check the length of each
and set these pieces aside for later
use.

5986 Rear Wall Angle (2)

10394 Side Wall Angle (4)
STEP
1
STEP
2
Rear Wall Angle
118 1/8" 300,0 cm
5986
5986
10394
Side Wall Angles
140 3/8" 356,6 cm
Rear Wall Angle 118 1/8" 300,0 cm
Side Wall Angles 140 3/8" 356,6 cm (2 Assemblies)
3
STEP
10394
(3)
15